The ViVi Nova system allows you to disassemble all parts easily for SNAP cleaning, especially of the atomizer heads. You can also trim the wicks if you desire to your preference.
Other Features of the Vision ViVi Nova System
The ViVi Nova utlizes the newer plastic which is virtually impervious to
juice leaching. It features a sealed connector with an airhole on the
side of the base itself to ensure great draw. Each peice of the assembly
was manufactured from scratch specifically for the ViVi Nova project
meaning all parts are specifically made for this assembly (no
retrofitting from the Stone series of tanks). The twist-on for the coil
head is actually a 510 connection.
The tubes were made just for the base to ensure elegant assembly and
leakage protection including a silcone seal on the top and bottom. The
wick is multi-stranded and braided.
VISION Team working hard on this project
and get more than 1000/pcs tested by radom before set an limited quantity supply to Royal customers .ViVi Nova will give you an totally different experience in Vaporing with the ideas of replaceable coils and Tubes will avoid you buy more completely unit when come cross need different ohm coils when use different device from 3.2V-6V or in any case come cross cracked in Tubes .
and get more than 1000/pcs tested by radom before set an limited quantity supply to Royal customers .ViVi Nova will give you an totally different experience in Vaporing with the ideas of replaceable coils and Tubes will avoid you buy more completely unit when come cross need different ohm coils when use different device from 3.2V-6V or in any case come cross cracked in Tubes .



